Ultrafiltration system in a 40ft container Wasseraufbereitungsanlage

Preis: Contact us for price
Marke: Ultrafiltration system
Ultrafiltration system in a 40ft container
Process specification
Raw water Groundwater
surface water
pre-treated waste water
Flow capacity 12 to 38 m³/h
Water temperature 2 to 35°C
pH 6,5 to 9,0
Membrane pore size 0,02 μm
Membrane module no 2 x 4
Membrane surface per module 60 m²
Membrane surface total 480 m²
Suspended solids inlet ca. 0,5 to 50
max. 100 mg/l
Suspended solids outlet < 0,5 mg/l
Maximum pressure in plant 5,0 bar
Main components
Pre-filter with automatic backwash
Flocculation with pH adjustment
Ultrafiltration
Backwash
Chemical enhanced backwash (CEB)
Dosing station for flocculation and pH adjustment
Dosing station for chemical enhanced backwash (CEB)
Compressed air system for integrity test and pneumatic drives
Optional component
Neutralisation (outside of the container)
Pipe and fittings
Water and waste water PP
Chemicals dosing station PP and PVC
Chemicals do dosing point EPDM hose with PVC protective pipe
Control panel
PLC System fabricate T-Box
Bus System Modbus
Operation and monitoring 15 inch touch panel
Remote control/monitoring
Container dimensions
Construction 40 feet standard sea container
Number of containers 1
Height x width x length 2.591 mm x 2.438 mm x 12.192 mm
Weight (without water) approx. 15.000 kg
Weight (in operation) approx. 25.000 kg
Possibility for transport
loading and moving the container
 By using crane and wire or steel chain over 4 pieces upper ISO-edges
 By using crane and wire or steel chain over 4 pieces lower ISO-edges
 Pockets for forklift truck are not foreseen on the container
Please apply the instruction manual of the container manufacturer for transport
loading and moving the container
as well as during preparation of the ground and storing position of the container
Medium connections
The container has several windows
which are equipped with cover and screw. Through these windows the pipes for the mediums and cables for the electrical power are connected with the container
Medium connections Flange EN 1092-1/10/DIN 2576 PN 10
Raw water 2 x DN 80
Waste water 2 x DN 125
Filtrate 1 x DN 125
Drain 1 x DN 125
1 x DN 80
Electrical power supply
Main electrical power supply for the container would be connected to the control panel
which distributes the electricity to the electrical consumers within the plant. The connection of the main cable from the voltage supply source to the control panel must be done by special qualified electrician
Required cable cross section 25 mm²
Required safety fuse (on site) 63 A
Voltage supply three-phase current 400 V
Optional equipments outside of the container
Following equipment is to be placed outside of the container and must be transported separately
Neutralisation tank with agitator
Diameter 2300 mm
Useful volume 5 m³
Agitator rated power 1,5 kW
Find more here
Kontaktdaten anzeigen
Contact us at
Kontaktdaten anzeigen