This ACCUWAY UT-300LX2M Lathe machine was manufactured in the year 2016. It is equipped with a FANUC 0i-T Control Unit. It has a heat exchanger for electric cabinet and a lubrication system. The monitor (LCD) is 10.4" colored and dispose a three color warning light.
application type: Turning
Location: Slovenia
machine type: Lathe
availability: Immediately
control unit brand: FANUC
GINDUMAC ID: SI-TUR-ACC-2016-00001
Measurements width: 2300 mm
Measurements depth: 5500 MM
Measurements height: 2200 MM
Interface: RJ-45
Spindle speed range: 3500 // 2700 // 2500 // 2000 1/MIN
Spindle motor power: 15/18.5 kW or 18.5/22 kW
Number of axis: 3
X-AXIS Movement: 300mm
X-AXIS Rapid traverse: 20m/min
Z-AXIS Movement: 2250mm
Z-AXIS Rapid traverse: 15m/min
Number of turrets: 1
Number of tool slots: 12
Capacity
swing over bed: 612mm // swing over saddle: 400mm / max. Turning diameter: 500mm // max. Turning length: 2180mm or 2100mm- Spindle
spindle nose taper: asa a2-8 or a2-11 // chuck diameter: 10"
12"
or 15" // bar capacity: 75mm
90mm
105mm
or 116. 5mm // spindle speed: 3500rpm
2700rpm
2500rpm
or 2000rpm // spindle motor power (cont. / 30min): 15/18. 5 kw or 18. 5/22 kw- Turret tooling system: bot- Turret driven type: hydraulic/servo // square tool shank size: 25mm // round tool shank size: 40mm- Tailstock body travel: 2040mm // quill travel: 120mm // quill diameter: 110mm // quill taper: mt#5- Rigid tapping- Heat exchanger for electric cabinet- 10. 4" colored lcd monitor- Lubrication system- Three-color warning light