Neue TyreON TSC3500E mobile midrise car scissor lift with electrical release Kfz-Scherenhebebühne

The price is excluding VAT and delivery costs.
Capacity 3500 kg - Mobile
Lifting height 11 - 128 cm
Platform length 156 - 214,5 cm
Drive 2.2 kW Electric - Hydraulic
Type Fully automatic
► Mechanically locked every 5 cm
► Electrically unlocked - direct drop
► No air required
► CE Auto-stop at 35 cm
► Foot protection brackets - removable
► Hand pump - also lowering if power failure
► Broken hose protection
► Tip-lever lifting system
► Mobile control unit - 130 cm high
► 85 cm working space between the lifting tables
Package L200 x W170 x H75 cm - 685 kg
Promo - For free Hand pump - lowering if power failure
Promo - For free Wheelset + 8 rubber blocks
Voltage 230V
Hydraulic oil 6L TyreON hv-iso-32 (not included)
Voltage 230 Volt / 1Ph / 2.2 KW / 16A(C)

Hand pump - lower if power failure - (€125)
Eight (8) rubber blocks - (€100)
Wheel set - (€145)
The mobile car lift can be moved by the wheelset and used as an extra workplace on asphalt, paving, or a concrete floor.
Very stable with 2 large floorplates for car repair and maintenance, changing wheels and tyres, garage work, etc.

Standard with 156 cm long platforms and 214.5 cm long with the ramps locked upwards for vehicles with extended chassis up to 3500 kg.

The spacious design with 85 cm between the tables provides good access to the underside of the engine, gearbox, drive shafts, starter motor, and so on.

The TyreON TSC3500E passed 115% dynamic and 150% static safety load tests.
TyreON TSC3500E - Mobile car lift with electrical release
Easy to install yourself
Lockable, fully load-bearing (3500 kg) ramps for a longer loading area
Lowering with auto-stop at 35 cm - you have to push the button again (
CE)
Acoustic and optical signal from 35 cm
 (CE)
Shafts with grease points—the midrise runs smoothly and has less wear
Easy drive-on thanks to 53-cm-wide platforms and ramps with anti-slip profiles
Hand pump allows the mid-rise car lift to be lowered in the event of a fault or power failure (ISO)
New model wheelset, nearly no muscle power required, and the mid-rise scissor lift manoeuvres very smoothly
From the highest point the lift descends instantly; the car lift does not come up a bit
All four scissor ends are equipped with durable steel roller bearings
With two
 powerful hydraulic cylinders and a tip-lever lifting system for lifting with full force from the lowest point
Powder-coated finish
It can be placed freely on the floor – no anchoring required
Mechanical synchronisation – the two tables move up and down perfectly in unison with a 24 V electrical circuit on the mid-rise frame lift and its control panel
The 24V electrical circuit is located on both the bridge and the control panel
The all-in-one control unit includes wheels, a handle, a mains switch, and a 230V cord with a plug
The motor operates quietly and has a connection load of 16 Amperes (C) at 230V
Foot entrapment protection
Parking feature - Mechanically locked - Electrically unlocked
The car lift can be mechanically locked into the safety locks using the lock button
This is also used to park a vehicle at a desired height for extended periods
This mobile car lift locks itself every 5 cm
The release is electric, so no compressed air is required
TyreON TSC3500E Mid rise lift 
The 24 Volt height switch stops the engine when the highest point is reached
Version with lifting platforms and ramps made of thick steel
Reinforced underneath both the platforms and ramps
2 powerful hydraulic cylinders and an aluminum engine of industrial quality
Mobile controller with main switch and on-off indicator light and Acoustic and optical signal
The 24V-cabling of the car lift is hidden guided by steel cable profiles 
TyreCARE - Delivery of original parts even after the warranty period
CE certified
Annex I of the Machinery Directive
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 1493:2010 Vehicle lifts
The TyreON TSC3500E Mid rise scissorlift - 3500 kg
Delivery - Mobile carlift
The mobile lift and its controller is fully functionally tested and packed in two wooden crates, together with
4 rubber lifting blocks - L12 x W10 x H5 cm
4 rubber lifting blocks - L12 x W10 x H3 cm
The wheel set, which is intended for moving the car lift, while the control unit is located on the platform
The installation and operating manual
The hydraulic oil, 6 liters of TyreON HV-ISO-32, is not included
 
TSC3500E mobile midrise car scissor lift with electrical release - Capacity 3,5T - Lifting height 128 cm - 230V - Graphite gray