Complete Bottling Line Alfatek 2018 Abfüllanlage

| Filling Monoblock | Alfatek | MBC 9.1 ISO EP | 2018 | crown cup 26 and 29
| Labeling Machine | Enos | Compatta | 2018 | adhesive



Description

Used Complete Bottling Line Alfatek 2018


HPE – HIGH-PRESSURE ELECTRONIC FILLING MONOBLOCK – CROWN CAPPER ALFATEK® Mod. 9/1


This machine is suitable for bottling fermented beer in the autoclave.


The complete bottling line for wine and beer is supplied ready with connection points for air, product, discharge point and electrical connection.




Max. production: 900/1000 BPH with carbonated product for 0,33l bottles.


Maximum valves flow rate: 1250 l/h


Maximum machine rotation speed 400-2000


Filler pitch diameter: 600 mm


Capper pitch diameter: 410 mm


Maximum bottle diameter: 115 mm


N.B.: Production may vary according to the type of product to be bottled, bottling pressure, product temperature, type of bottle, etc.


Condition of the beer product:

a) constant and adequate pressure

b) constant temperature 0° -2 °

c) rested product not overflowing

Composition




FILLER Series BHPE ELECTRONIC ISO BARICA HIGH PRESSURE 9 valves


SINGLE-HEAD TURRET FOR CROWN CAPS

Model EAGLE/C




– Voltage: 380V – 50hz

– Direction of rotation: Clockwise (Bottles from left to right)

– Electrical panel position: Left

– Control panel plate language: Italian

– Worktop: 1000 + – 50


Bottle size:

– Height: from 230 to 360 mm.

– Diameter: from 58 to 110 mm.

– Bottleneck diameter: from 16 mm (int.) to 30 mm (ext.)

– Level variation in bottles. : from 40mm to 75mm

– Bottleneck height: H. level + 30 mm

– Box for conveyor belt: 100×100 mm.

– Conveyor belt chain: 82.5 mm metallic slat, straight.


Used Complete Bottling Line Alfatek can only be unloaded with a suitable forklift

with a fork length of no less than 1,400 mm long.

Complete with safety guards in accordance with CE standards and equipment for a single cylindrical bottle format.


COMPONENTS




Accident prevention protections in accordance with CE standards


Manually adjustable tank height


Ring-type tank that can be completely opened at the top


Bottle holder pistons are completely in AISI stainless steel 304 anchored high


Non-compressed air mechanical pistons tested for working pressures of 6 atm.


Delayed operation of the pneumatic valve at the inlet product


Thermometer for temperature control


Parking lung under inert gas pressure


Ethernet socket for ADSL connection for remote control




QUANTITY DESCRIPTION


* product booster pump (at constant pressure) excluded – necessary in case higher pressure has to be reached than the max. allowed by the autoclave.

* cap lifter excluded


FILL TANK SUPPLEMENT HIGHLY POLISHED INTERNALLY


A FOAMING UNIT installed between filler and capper is necessary to guarantee a low oxygen pickup in the beer, to eliminate the oxygen present in the headspace


Consisting of:

– High-pressure centrifugal pump with the start command

stop from the touchscreen- Bottle presence unit with Fcl + solenoid valve with liquid control

– Flow rate control via needle valve placed on the pipe water outlet

– 10″ microfiltration housing in 316 stainless steel for the application of a 0.2-micron microfiltration filter, to make the water sterile (cartridge not included in the supply)

Water outlet pressure 0.5 -3 bar

Nozzle outlet hole 0.5 mm


ACCESSORIES


FOR CROWN CAP SIZE CHANGE

ADDITIONAL EQUIPMENT for a cylindrical bottle

PHOTOCELL INPUT/OUTPUT

SUPPLEMENT FOR ACCIDENT PREVENTION PROTECTION DOORS IN GLASS INSTEAD OF LEXAN


PLANT FOR THE HANDLING OF

TRIBLOCK (max. 6 meters of chain)

– Drive head with suspended motor-modulator. (0.37 kW);

– Return head suspended;

– M. 1 conveyor belt (in addition to the one inside the machine)

– M. 2 chain for conveyor belt (beyond the internal one to the car)

– Conveyor motor control panel in compliance with CE standards, on the conveyor, with start, stop and emergency buttons.


END TABLE PLACED AFTER THE

BOTTLING MONOBLOC

size 500x1000mm


LINEAR ADHESIVE LABELLER ENOS Mod. “COMPACT”


Used Complete Bottling Line Alfatek suitable for applying body labels on bottles round or wraparound label, with an electronic speed modulator.

Machine complete with conveyor belt for insertion into a bottling line.

Machine in satin stainless steel.

Labeller with compressed air.

Technical features:

Production: 600 – 2500 b/h

Net weight: 200 Kg

Worktable: 1000mm ±

Voltage: 380 v


EQUIPMENT FOR APPLYING THE BACK LABEL ON THE SAME ROLL

PRINTER Mod. DATA suitable for thermal transfer overprinting on the label or back label, with area

28x18mm print



Speed: 1200 BPH
Containers: Glass
Formats: 0.33 L, 0.75 L
Product: Alcohol, Beer
Fill type: Isobaric
Neck type: 16 and 30